Category B.1.1 - Lamps exempted for special end-use purpose
B.1.1.1 Traffic/signal lamps
1.Signal lamps
2.Aviation/Aircraft lighting for runways and planes, all exterior applications
3.Train lighting, including signal lighting
4.Water craft lighting, including signal lighting
5.Automotive lighting/lamps
B.1.1.2 Heating lamps (infrared)
1.Infrared heat lamps – comfort heating (outdoor and indoor)
2.Infrared heat lamps – industrial
3.Infrared heat lamps – animal rearing
4.Infrared heat lamps – health care
B.1.1.3 Luminaires not connected to the mains, such as:
1.Luminaires powered with solar cells (for outdoor illumination, …)
Category B.1.2 - Lighting products exempted as used for non-primary lighting purpose/applications
B.1.2.1 Products intended for use in applications other than general lighting and products incorporated into products which do not provide a general lighting function, e.g.:
1.Emission of light as an agent in chemical or biological processes (such as polymerization, photodynamic therapy, horticulture, pet care, anti-insect products)
2. Image capture and image projection (such as camera flashlights, photocopiers, video projectors)
3. Lamps for swimming pools
4. Pet care (aquarium, terrarium, etc.)
5. Anti-insect lamps
6. Disinfection
7. Tanning
BDisplay optic lamps (>lumens), such as:
1. Stage and studio lamps
2. Theatre lamps
3. Television (TV) lamps
4. Studio lamps
5. Photo lamps – Flashlights or lamps for the development of pictures
6. Projection lamps
7. Traffic/signal lamps
8.Lamps intended for use in potentially explosive atmospheres
9. Emergency lighting luminaires and emergency sign luminaires
10.Control gears (ballasts) intended for use in luminaires defined in paragraph (c) and designed to operate lamps in emergency conditions
11. Luminaires intended for use in potentially explosive atmospheres and medical devices
12. Integrated luminaires for decorative purpose
13. Lamps marketed for operation with batteries only
14. Lamps marketed as part of a product whose primary purpose is not lighting. However, if they are offered for sale, hire or hire purchase or displayed separately, for example as spare parts, they shall be included within the scope of this Standard
Category B.1.3 – Products exempted for technical reasons
B.1.3.1 Blended high intensity discharge lamps having:
1. 6 % or more of total radiation of the rangenm in the range ofnm; and
2. 11 % or more of total radiation of the rangenm in the range ofnm; and
3. 5 % or more of total radiation of the rangenm in the range ofnm;
B.1.3.2 Blended high intensity discharge lamps having:
1.The peak of the radiation for Ultra Violet A (UVA) and Ultraviolet B (UVB);
B.1.3.3 Double capped fluorescent lamps having:
1. A diameter of 7 mm (T2) and less;
2. A diameter of 16 mm (T5) and lamp power P ≤ 13 W or P > 80 W;
3. A diameter of 38 mm (T12), lamp cap G-13 Medium BiPin base, ± 5 m (+magenta, –green) color compensating filter value limit (cc). CIE coordinates x=0.330 y=0.335 and x=0.415 y=0.377;
4. A diameter of 38 mm (T12) and equipped with an external ignition strip.
5. Single capped fluorescent lamps having a diameter of 16 mm (T5) 2G11 4 pin base, Tc = 3,200 K with chromaticity coordinates x=0.415 y=0.377 and CCT/Tc = 5,500 K with chromaticity coordinates x=0.330 y=0.335
6. High intensity discharge lamps with CCT/Tc >K
7. High intensity discharge lamps having a specific effective UV output > 2 mW/klm
8. High intensity discharge lamps not having lamp cap E27, E40, PGZ12
9. Light sources that do not comply with the definition of white light sources
