KUNLU 昆仑智能 专业 /专注/专心
KL-130 150-180+
高速伺服一拖一平面口罩机 >>> 片1分钟
(外耳带内折)产品特点>
1、机器运行速度高，性能稳定
2、采用超声波焊接技术，成品美观、卫生、环保
3、整个生产线从入料、鼻线插入、封边、裁切成品均为自动化作业，高效，省人工
4、机架结构采用铝合金制作，关键部位采用不锈钢，整线具有不生锈、耐用、易清洁、美观等特点
5、电脑PLC编程控制，伺服驱动，自动化程度高。稳定性高、故障率低、噪音少
设备组成》
触摸屏 2套 纠边机构 3套 伺服电机10套 控制器10套
产品参数》
整机尺寸 4000(L)X600(W)X2000(H)mm
整机重量 1000KG
口罩尺寸 规格17.5x9.5cm(成人)可以更换托盘等适应17.5x9cm
适用压缩气体 0.6-0.7MPa
耗气量 10L/min
电压 220V/50/60Hz
功率 15KW
整线效率 150-180+pcs/min
生产环境要求 温度10-35湿度35-65%HR，无粉尘(洁净度不低于10万级)
超声波 20KHZ2Kw*2个间发波15KHZ26KW*1个长发波AC220\
焊接强度 鼻线长度不小于8cm，口罩带与口罩体连接处断裂强度不小于10N
上料料盘 可以适应3盘或4盘直径650mm的布卷料
英文介绍
KUNLU Kunlun Intelligence Special field of study /Concentration/Concentration
KL-130 150-180+
High-speed servo one-to-one-plan mask machine >>> One minute.
(Outer Earband Inner Folding) Product Features>
1. The machine has high running speed and stable performance.
2. Adopt ultrasonic welding technology, and the finished product is beautiful, hygienic and environmentally friendly.
3. The whole production line is automated from feeding, nose thread insertion, edge sealing and cutting finished products, which is efficient and labor-saving.
4. The rack structure is made of aluminum alloy, and the key parts are made of stainless steel. The whole line has the characteristics of non-rust, durable, easy to clean and beautiful.
5. Computer PLC programming control, servo driver, high degree of automation. High stability, low failure rate and low noise
Composition of equipment
Touch screen 2 sets Edge correction mechanism 3 sets Servo motor 10 sets 10 sets of controllers
Product Attributes
Whole unit size 4000(L)X600(W)X2000(H)mm
Whole unit weight 1000KG
Mask size Specification 17.5x9.5cm (adult) can replace trays, etc. to adapt to 17.5x9cm
Suitable for compressed gases 0.6-0.7MPa
Air consumption. 10L/min
Voltage 220V/50/60Hz
Power 15KW
Whole line efficiency 150-180+pcs/min
Production environment requirements Temperature 10-35 humidity 35-65% HR, no dust (cleanliness not less than 100,000)
Ultrasonic 20KHZ2Kw*2 inter-waves 15KHZ26KW*1 long-wave AC220\
Welding strength The length of the nose line shall not be less than 8cm, and the fracture strength at the connection between the mask strap and the mask body shall not be less than 10N.
Feeding plate It can adapt to 3 or 4 plates of cloth coils with a diameter of 650mm.
