钢丝绳压制索具
VAF06-L
V-----钢丝绳索具 teel wite rope sling
A-----压制型式（B-铝合金套管为直形，无套环）
ssed type (with straight aluminium ferrule without thimble)
F-----钢丝绳直径(F-麻芯，W-钢芯)
Steel wire rope cope(F-FC，W-IWRC)
钢丝绳直径
Steel wire rope core diameter
L-----钢丝绳有效长度
fective length of steel wire rope
本表工作载荷所有钢丝绳规格为：
Φ6-Φ60 采用6×37（b）-1670、
Φ62-Φ120 采用8×61（b）-1670、
Φ122-Φ190采用8×91（ab）-1670；
The specification of the steel wire rope used by the following working load in the table:
Dia6mm-60mm use the construction of 6*37(b)-1670
Dia 62mm-120mm use the construction of 8*61(b)-1670
Dia 122mm-190mm use the construction of 8*91(ab)-1670
钢丝绳结构不同，其工作载荷不同，可根据客户要求钢丝绳结构来计算工作载荷的5倍
Different construcrtion of the rope means different working load,we can calculate the working load with the steel wire rope construction that the customer required.
索具的破断拉力为工作载荷的5倍；
The sling’s breaking load is 5 times of its working load .
直径Φ90以上压制钢丝绳索具形式为每端压制两个铝合金压制接头。
The pressed type for the rope with dia 90mm is pressed two aluminium ferrule on each end of the sling.
主要用途：各种起重, 提升和牵引设备
Main applications: various equipment for derricking , lifring and drawing
