Automotive body air tightness test
用于汽车车体气密性试验、汽车空调风量分配的性能试验、汽车空调出风口泄漏量测试,满足标准GB126-85的要求
Used in car body air tightness test, the performance of the automobile air conditioning air distribution test, automobile air-conditioning outlet leakage test, to meet the requirements of the standard GB126-85
汽车车体气密性测试台
Auto body air tightness test bed
(用于汽车车体气密性试验、汽车空调风量分配的性能试验、汽车空调出风口泄漏量测试,满足标准GB126-85的要求)
(for auto body air tightness test, the performance of the automobile air conditioning air distribution test, automobile air-conditioning outlet leakage test, to meet the requirements of the standard GB126-85)
汽车车体气密性测试台技术指标
Auto body air tightness test bed
技术要求
The technical requirements
1. 被测风量范围：吹吸气体风量：15～800 m3/h。
Measured air volume range: 1. The suction gas blowing air volume: 15-800 m3 / h.
2. 测定精度：重复性精度：±2％
2. The measurement accuracy, repeatability precision: plus or minus 2%
3. 环境要求：温度：-5℃～50℃；湿度：65±20%（用户保证）
3. Environmental requirements: temperature: - 5 ℃ ~ 50 ℃; Humidity: 65 + / - 20% (the user guarantee)
4.设备电源 Power：AC380V 3Φ
4. Equipment Power supply Power: 3 Φ AC380V
5.测试参数 ：风量、电压、电流、静压、大气压、温湿度等
5. Test parameters: air flow, voltage, current, static pressure, atmospheric pressure, temperature and humidity, etc
6.喷嘴控制方式：手动
6. The nozzle control mode: manual
7.静压要求：-120 Pa～250Pa(略大于250 Pa)
7. Static pressure requirements: - 120 Pa ~ 250 Pa (slightly larger than 250 Pa)
8.软件功能 （本公司根据客户要求自行设计）
8. Software functions (the company according to customer requirements to design)
A.中英文界面可选。 B.试验工况模拟和设置。 C.试验件规格历史数据管理。 D．试验数据保存和打印。E.曲线图：纵坐标和横坐标为分别可选根据风量、静压、转速、电压、电流、功率之间的关系，模拟出不同性能参数之间的关系曲线图。
A. interface is optional in both Chinese and English. B. test results and Settings. C. test specification history data management. D. test data save and print. E. graph: the ordinate and abscissa for optional respectively according to the air volume, static pressure, rotate speed, voltage, current, power, the relationship between the simulating the relationship between the different performance parameters of the graph.
