阿科牧机械专业生产销售,模温机（模具温度控制机）,压铸模温机(镁合金压铸模温机),油加热器,冷冻机(水冷式冷冻机、风冷式冷冻机),冷冻机系统,辊轮控温系统(辊轮模温机),橡胶机械控温,密炼机控温机.高温模温机.温控范围水度.油45-350度
本公司针对压铸行业开发出来的一款高性能的设备。跟国内同行业相比性能更高，价格更优惠，是众多压铸厂家的首选模温机。
压铸模具控温设备：
管路防爆装置
Explosion-proof device for pipelines
回油温度显示表
Thermometer for return oil
开机自动排气功能
Automatic air-exhausting function after startup
油泵反抽回油功能
Return oil back suction of oil pump
加热功率切换功能
Switchover of heating power
隔离式电器控制箱,延长电器使用年限
Isolated electric box for longer services lives of electric appliances
负压系统运转(选购)
Negative-pressure system (optional)
RS485通讯功能,实现自动化管理.(选购)
RS485 communication function for automated management (optional)
即时冷却回油关机功能
Instant cooling return oil shut-down function
热油BY-PASS泄压回路
BY-PASS pressure release loop for hot oil
油泵马力和加热功率可订作
Customizable horsepower and heating power of oil pump
全系列采用西德SPECK油泵(磁力泵、永不漏油)
SPECK oil pumps (magnetic pumps never suffering from oil leakage) imported from Germany for all series products
全系列采用欧美高温管路元件
American and European high-temperature pipeline components for all series products
电器采用OMRON. FUJI. TE. LG.
Brands OMRON, FUJI, TE and LG for electric appliances
温度控制范围: 进水温+25℃→350℃
Range of temperature control: +25℃→350℃ for incoming water
304不锈钢一体管路,减少管阻及锈垢
304 stainless steel integrated pipelines for less pipe resistance and rust
控制方式: 采用进口微电脑或(选购)PLC控制
Control mode: imported microcomputer or PLC (optional)
安全保护完善,故障显示,维修.保养无需专业人员
Perfect safety protection, fault display, easy repair and maintenance even without professionals
DC系列压铸模温机(镁合金压铸模温机);铝合金压铸模温机;合金压铸模温机，使用工作温度高达350℃，采用当今世界进的流程设计，控温精度高，导热速度快，高效节能。并可配置自动吸出回油、全负压运转、RS485通讯等功能，完全可与当今代表水准的欧洲进口模温机相媲美。
